What is the water absorption rate of wall lamp plastic housing?

Jan 08, 2026

Leave a message

Jessica Wang
Jessica Wang
Decorator & Blogger, obsessed with how lighting can transform a space. I use宁波格莱曼建材有限公司's products to bring my creative visions to life in homes across the country.

As a supplier of wall lamp plastic housing, I often receive inquiries from customers about various aspects of our products. One question that has come up more frequently lately is about the water absorption rate of wall lamp plastic housing. In this blog post, I'll delve into what the water absorption rate is, why it matters for wall lamp plastic housing, and how we ensure the quality of our products in this regard.

What is the Water Absorption Rate?

The water absorption rate is a measure of the amount of water a material can absorb under specific conditions. It is usually expressed as a percentage of the material's weight. For plastics, the water absorption rate is determined by immersing a sample of the plastic in water for a set period at a specific temperature and then measuring the increase in weight.

The water absorption rate is influenced by several factors, including the type of plastic, its chemical structure, and the presence of additives. Different plastics have different inherent water absorption characteristics. For example, some plastics, like polypropylene, have a very low water absorption rate, while others, such as nylon, can absorb a relatively large amount of water.

Why Does the Water Absorption Rate Matter for Wall Lamp Plastic Housing?

The water absorption rate of wall lamp plastic housing is crucial for several reasons. Firstly, water absorption can affect the physical and mechanical properties of the plastic. When plastic absorbs water, it can swell, which may lead to dimensional changes in the housing. This is particularly problematic for wall lamps, as any change in the dimensions of the housing can affect the fit and installation of the lamp components, potentially leading to poor performance or even safety issues.

Secondly, water absorption can also impact the electrical properties of the plastic. If the plastic housing absorbs water, it can become more conductive, increasing the risk of electrical short - circuits. This is a serious safety concern, especially for wall lamps that are installed in areas where they may come into contact with moisture, such as bathrooms, kitchens, or outdoor spaces.

In outdoor applications, wall lamps are exposed to various weather conditions, including rain, humidity, and dew. A high water absorption rate can cause the plastic housing to degrade over time, leading to cracking, discoloration, and a reduced lifespan of the lamp. Therefore, a low water absorption rate is essential for ensuring the durability and reliability of wall lamp plastic housing, especially for Outdoor Light Fixtures and LED Wall Light Outdoor.

Our Approach to Controlling the Water Absorption Rate

As a supplier, we take several steps to ensure that our wall lamp plastic housing has a low water absorption rate. Firstly, we carefully select the type of plastic used in the manufacturing process. We typically use plastics with inherently low water absorption rates, such as polycarbonate and acrylonitrile butadiene styrene (ABS). These plastics offer a good balance of mechanical strength, electrical insulation, and low water absorption.

In addition to material selection, we also pay close attention to the manufacturing process. We use advanced injection molding techniques to ensure that the plastic is properly formed and that there are no voids or pores in the housing that could allow water to penetrate. We also apply special coatings to the surface of the plastic housing to further reduce water absorption. These coatings act as a barrier, preventing water from coming into direct contact with the plastic.

E27 Max 60W Lantern LightsStainless Steel Wall Light

We conduct rigorous quality control tests on our products to ensure that they meet the required standards for water absorption. Our testing procedures involve immersing samples of the plastic housing in water for a specified period and measuring the weight gain. We also test the physical and electrical properties of the plastic before and after water immersion to ensure that there are no significant changes.

Comparing Different Plastics for Wall Lamp Housing

Let's take a closer look at some of the common plastics used for wall lamp housing and their water absorption rates:

  • Polycarbonate (PC): Polycarbonate is a popular choice for wall lamp housing due to its high impact resistance, transparency, and low water absorption rate. The water absorption rate of polycarbonate is typically less than 0.15%, which means it can resist moisture well and maintain its dimensional stability.
  • Acrylonitrile Butadiene Styrene (ABS): ABS is another widely used plastic for wall lamp housing. It has good mechanical properties, is easy to process, and has a relatively low water absorption rate of around 0.2 - 0.4%. ABS is also known for its good chemical resistance and surface finish.
  • Polypropylene (PP): Polypropylene has an extremely low water absorption rate, usually less than 0.01%. It is lightweight, has good chemical resistance, and is relatively inexpensive. However, it has lower impact resistance compared to PC and ABS, so it may not be suitable for all wall lamp applications.

The Importance of Low Water Absorption in Stainless Steel Wall Lamp Combinations

In some cases, wall lamps may combine plastic housing with stainless steel components. A low water absorption rate of the plastic housing is even more important in these combinations. If the plastic absorbs water and swells, it can cause stress on the stainless steel parts, leading to corrosion or loosening of the connections. This can compromise the overall integrity and appearance of the wall lamp.

Conclusion

The water absorption rate of wall lamp plastic housing is a critical factor that affects the performance, safety, and durability of wall lamps. As a supplier, we are committed to providing high - quality wall lamp plastic housing with a low water absorption rate. By carefully selecting the materials, using advanced manufacturing techniques, and conducting thorough quality control tests, we ensure that our products meet the highest standards.

If you are in the market for wall lamp plastic housing or have any questions about our products, we encourage you to contact us for a detailed discussion. We are more than happy to provide you with samples, technical specifications, and pricing information. Let's work together to find the best solution for your wall lamp needs.

References

  • "Plastics Engineering Handbook", Third Edition, by George E. Totten and James L. English
  • "Polymer Science and Technology", Second Edition, by Robert F. Storey
Send Inquiry