Pls refer to different environment to choose IP grade

| IP Grade | Protection Status | Used Area | Attention |
| IP20 | not waterproof, | indoor room | not recommended in kitchens and bathrooms |
| IP23 | waterproof (prevent vertical falling water droplets and 60 degree incline falling water droplets); | indoor or outdoor under eaves (such as outdoor wall lamps, need to be installed under the eaves) | |
| IP43 | waterproof (prevent vertical falling water droplets and 60 degree incline falling water droplets, afraid of splashing); dustproof (>1mm); insect proof (>1mm) | same as above | same as above |
| IP44 | waterproof (360 degrees waterproof entry, not afraid of splashing but afraid of pressure spray); dustproof (>1mm); insect proof (>1mm) | outdoor balcony, bathroom, outdoor (such as wall lamp, chandelier, ceiling lamp, ground insert lamp) | 1. lamps connected on the ground should not be connected with electrical tape, but should be with IP68 waterproof junction box to avoid the danger of short circuit and electric shock caused by being submerged in water 2. ground installation of lamps and lanterns, no longer low-lying easy water environment, because the lamps and lanterns can not be submerged by water |
| IP54 | waterproof 360 degrees waterproof entry, not afraid of splashing); no dust enter lamp body; no insects enter lamp body | same as above | same as above |
| IP65 | waterproof (any direction spraying water is OK, but can not be flooded); no dust enter lamp body; no insects enter lamp body | same as above | same as above |
| IP66 | waterproof (any direction water is OK, but can not be flooded); no dust enter lamp body; no insects enter lamp body | more suitable for use in sauna room, kitchen, basement, garage and other bad environment areas | same as above |
| IP67 | waterproof (can be submerged in water for a short time, but not in water); no dust enter lamp body; no insects enter lamp body | on the road (like underground lights installed on the ground and on ships) | do not use electrical tape for wiring, pls use IP68 waterproof junction box, to avoid short circuit caused by submerged cup of water |
| IP68 | waterproof (can installed under water <1m); no dust enter lamp body; no insects enter lamp body | swimming pool, water pool | 1. must use 12V/24V low-voltage power supply, to avoid the danger of short circuit and electric shock caused by flooding 2. the junction box must be IP68, to prevent water vapor from entering the lamp body along the wires, damaging the internal circuit and causing the lamp to burn |




